Accessories
Moldings
Precision-engineered transition moldings in matching European oak finishes. Every detail resolved — from stair edges to door thresholds.
Hardwood Moldings
European oak transition profiles, precisely matched to our hardwood collections.
Cross-Section Profile
Flush Stairnose
Creates a clean, flush transition at the edge of stairs. Aligns perfectly with the floor surface for a seamless, built-in appearance.
Width
3 15/16"
Height
3/4" / 19/32"
Length
7' 10½"
Material
European Oak
Cross-Section Profile
Reducer
Smooth transition between two floors of different heights. Ideal for doorways and transitions between hardwood and lower-profile surfaces.
Width
1 3/4"
Height
19/32"
Length
7' 10½"
Material
European Oak
Cross-Section Profile
End Mold
Used where the flooring meets a vertical surface such as a sliding door track, fireplace hearth, or other fixed obstacle.
Width
1 3/4"
Height
3/4"
Length
7' 10½"
Material
European Oak
Cross-Section Profile
T-Mold
Bridges two floors of equal height in a doorway or open transition. The T-profile allows natural expansion.
Width
1 3/4"
Height
19/32"
Length
7' 10½"
Material
European Oak
Cross-Section Profile
Full Stair Tread
A complete solid-oak stair tread that replaces the entire horizontal step surface. Engineered for safety and durability.
Width
4 15/16"
Height
1 3/16"
Length
7' 10½"
Material
Solid European Oak
Laminate Moldings
Matching transition profiles for our laminate flooring collections. Engineered for 12mm laminate products.
Cross-Section Profile
Reducer
Smooth transition between two floors of different heights. Ideal for doorways between laminate and lower-profile surfaces.
Width
1 3/4"
Height
15/32"
Length
7' 10½"
For
Height transitions
Cross-Section Profile
T-Molding
Bridges two floors of equal height in a doorway or open transition, allowing natural expansion.
Width
1 3/4"
Height
15/32"
Length
7' 10½"
For
Same-height transitions
Cross-Section Profile
Quarter Round
Covers the expansion gap along walls and baseboards for a clean, finished look.
Width
1 1/8"
Height
19/32"
Length
7' 10½"
For
Wall & baseboard gaps
Cross-Section Profile
Overlap Stairnose
Overlaps the edge of stairs for a safe, finished stair nose profile. Quick to install over the existing step.
Width
2 3/16"
Height
11/16"
Length
7' 10½"
For
Stair edges (overlap)
Cross-Section Profile
Flush Stairnose
Creates a flush, built-in appearance at the stair edge. Glues down for a seamless transition.
Width
4 1/2"
Height
1"
Length
7' 10½"
For
Stair edges (flush)
Cross-Section Profile
End Molding
Used where flooring meets a vertical surface such as a sliding door track, fireplace hearth, or fixed obstacle.
Width
1 3/8"
Height
1 3/8"
Length
7' 10½"
For
Vertical surface termination
Need a specific profile?